- YEARS COMBINED
SELECTIVE DEMOLITION EXPERIENCE - FAMILY &
VETERAN OWNED - LICENSED, BONDED
& INSURED - INTERIOR REMOVAL
DEBRIS HAULED OFF
TAKE IT BACK.
MOVE IT FORWARD.
Kitchens, bathrooms, flooring, drywall
and verified non-bearing framing.

A careful start to your home’s next chapter.
Prepare your home for a remodel with selective interior removal. We take out the agreed finishes, fixtures and non-bearing elements while keeping the spaces and structure you plan to retain at the center of the scope.
A kitchen or bathroom remodel, a whole-home flooring change or a defined interior strip-out all benefit from a clear starting point. Share what is staying, what is coming out and whether the home will be occupied during the work.
What comes out.
What comes next.
Bring one removal task or a connected interior scope. We define the boundaries before work begins, then haul off the demolition debris.
Build your scope01Complete kitchen demolition
Remove the existing kitchen elements included in your remodel scope—cabinetry, countertops, backsplashes, flooring and selected wall finishes. We clarify what is being removed, what is being retained and how the room will be handed over for the next trade.
Appliance handling, service disconnections and retained finishes are discussed before work begins. Utility work and any specialist trades must be coordinated separately where required.
02Complete bathroom demolition
Create a clean starting point for a bathroom renovation. The agreed scope may include vanities, tubs or shower assemblies, tile, flooring and selected drywall. Access routes, nearby rooms and the surfaces staying in place all inform the removal plan.
Plumbing and electrical isolation, hidden conditions, moisture damage and any material testing need to be resolved as part of planning. New plumbing, waterproofing and reconstruction belong to the following phase.
03Flooring removal of every kind
From tile and stone to wood, laminate, vinyl and carpet, we remove existing floor coverings to prepare for what comes next. The covering, attachment method, underlayment and condition of the base help determine the tools, handling and cleanup needed.
Adhesives, mortar beds and substrate preparation can change the scope. Tell us what new floor is planned so the handoff requirements can be discussed with your installer.
04Selective drywall removal
Open up the areas your renovation needs without treating the whole interior as a teardown. We define the limits of drywall removal around the intended work, paying attention to adjacent finishes and services that may be concealed behind them.
Ceilings, insulation and concealed mechanical or electrical systems should be identified during the site review. Existing materials may require assessment before disturbance.
05Non-bearing framing removal
Remove verified non-load-bearing interior framing to support a revised layout. We establish which partitions are included and which elements remain, with structural questions resolved before demolition starts.
A wall’s role cannot be determined from appearance or a photo alone. Load-bearing alterations, engineering and structural demolition are outside this stated offering and require the appropriate assessment and scope.
Soft demolition starts with clear limits. Retained structure, utility coordination, permits and any suspect materials must be addressed in the project plan. Our stated framing offering is non-bearing removal.
LESS IN THE WAY.
MORE POSSIBILITY.
Real spaces, real removal work.
Explore the details inside the transformation.
See the layers.
See the starting point.
Explore two angles of the same kitchen removal. Drag the arrows to see the tile, exposed slab and opened wall in detail.


Drag the on-image arrows to compare. Use left and right keys when the handle is focused.
A closer look at our work, from selective kitchen removal to open commercial interiors.
EXPERIENCE IN.
EXCUSES OUT.
Family owned. Veteran owned.
Focused on the work in front of us.
Years of combined experience
in selective demolition.
The first step deserves the right crew.
Demolition Masters is a family and veteran owned selective demolition company serving the Phoenix Valley and beyond. Our team brings more than 35 years of combined experience to residential and commercial interior demolition.
We believe the way a crew works matters as much as what it removes. That means arriving on time, working professionally, keeping a clean and safe jobsite, and paying attention to the full agreed scope. We take pride in careful, complete work and in the customers who trust us with it.
Whether you’re opening up a kitchen, replacing flooring or clearing a commercial interior, we start by understanding what needs to go and what needs to stay. That same focus carries through to the removal, the cleanup and the haul-off.
Show up ready.
On-time arrival and a professional crew set the tone for the project.
Respect what stays.
We agree on the removal limits and pay attention to the spaces around the work.
Work with care.
A clean and safe jobsite is part of the way we approach demolition.
Follow through.
Careful completion and debris haul-off matter as much as the first removal.
MORE THAN
BRUTE FORCE.
A good beginning is deliberate.
Here’s how the journey could look.
It starts with your plans, the property and the questions that matter. We talk through the space and the outcome you have in mind.
Define what goes, what stays and what comes next. Access, surrounding structures and the project sequence shape the approach.
A coordinated removal creates the starting point for your next phase. The goal is simple: room for progress.
MEASURE THE SCOPE.
MAKE YOUR MOVE.
Explore a rough planning range.
Then prepare a useful brief for the team.
Illustrative benchmark allowances, not company prices or a binding quote. Final pricing follows scope and site review.
workstreams
- Floor covering
- 500 sq ft
- Drywall surface
- 0 sq ft
- Kitchen / bathroom sets
- 0 / 0
- Bare non-bearing framing
- 0 linear ft
- Debris
- Ordinary handling assumed once
Breakdown & assumptions
Illustrative component breakdown
- Tile or stone flooring removal
- $1,500–$3,000
Components are shown to the nearest cent; the total range is rounded outward to the nearest $50.
What the range assumes
- Illustrative budget range based on national benchmarks and stated assumptions. Not company pricing, a verified Phoenix market rate, a bid or a binding quote.
- Floor coverings, drywall, room components and bare framing are separate allowances. Count each removed material once. Do not add flooring or drywall again as part of a room package.
- Ordinary debris handling is assumed in these allowances; no extra blanket haul-off charge is added. Special disposal and actual debris quantities require review.
- Permits, material testing, hazardous-material handling, utility trades, engineering, structural work, reconstruction and special travel are not priced. Small jobs may incur minimum charges not represented here.
- Layers, stairs, occupied spaces and commercial conditions produce review flags, not invented cost multipliers. Final pricing follows site and scope review.
Model allowances
- Carpet removal
- $1.4–$2.5 per sq ft
Rounded national carpet benchmark; one floor-covering layer.
- Wood, laminate or vinyl removal
- $2.5–$4.5 per sq ft
Generic flooring benchmark applied illustratively to wood, laminate and vinyl; attachment method requires review.
- Tile or stone flooring removal
- $3–$6 per sq ft
Rounded tile benchmark applied illustratively to tile or stone; mortar beds and substrate work are not separately modeled.
- Mixed or unconfirmed flooring removal
- $2.5–$6 per sq ft
Illustrative envelope of generic flooring and tile benchmarks, not a separate published rate.
- Drywall removal
- $1.05–$1.9 per surface sq ft
Measure the board surface being removed, not the room's floor area.
- Kitchen cabinet and counter allowance
- $850–$1,800 per component set
Derived allowance for about 25 linear ft of cabinets and two countertop sections. Excludes flooring, drywall, backsplash, appliance handling and utility work; this is not a complete kitchen tear-out price.
- Bathroom fixture and vanity allowance
- $350–$800 per component set
Derived allowance for one tub, one toilet and four linear ft of vanity. Excludes flooring, drywall, tile surrounds and utility work; this is not a complete bathroom tear-out price.
- Bare non-bearing framing allowance
- $10–$25 per linear ft
Chosen illustrative allowance informed by a historical bare-stud benchmark at an assumed eight-foot wall height. It is not a published current rate. Excludes wall coverings, structural changes, engineering and utility work.
Share photos and the materials to remove so the team can review the next step.
Approximate quantities and national benchmarks only. Kitchen and bath components exclude separately measured flooring and drywall. This is not a schedule, structural assessment or binding quote.
VALLEY ROOTS.
WIDER REACH.
The Phoenix Valley and Payson.
Prescott projects considered, too.
Phoenix.
Our home base. Residential and commercial interior demolition throughout Phoenix.
Share the city, approximate removal scope and a few site photos. We’ll talk through scheduling, access, travel and what the project needs before anything is confirmed.
Elsewhere in the Valley? Start a conversation. The map is an overview, not a property-level eligibility boundary.Before we start,
let’s clear a few things up.
A little clarity at the beginning
helps the whole project move forward.
01What is interior soft demolition?
Interior soft demolition, often called a strip-out or selective interior demolition, removes agreed nonstructural elements inside a building to prepare for renovation. That can include kitchens, bathrooms, floor coverings, drywall and verified non-bearing framing. The retained building structure and the exact removal limits guide the plan.
02Do you handle both homes and commercial spaces?
Yes. Demolition Masters handles residential and commercial interior demolition. A home remodel and a commercial build-out call for different access, scheduling and protection decisions, so we establish those details with you before defining the work.
03Do you remove load-bearing walls?
The stated framing service is non-bearing framing removal. Structural or load-bearing changes need the appropriate professional assessment, design, approvals and a separately confirmed scope. Photos are helpful for an initial conversation, but they do not establish whether a wall is structural.
04Is debris haul-off included?
We haul off the demolition debris included in your agreed scope. We confirm the materials being removed, access for handling them and the cleanup expected at handoff. Unusual, regulated or hazardous materials require specific assessment and arrangements.
05What about dust, older materials and utility connections?
Dust-control measures, work-area separation, retained finishes and utility coordination should be discussed during the site review. Older flooring, adhesives, coatings or other suspect materials may require testing or specialist handling before they are disturbed. This site does not advertise asbestos or lead abatement services.
06Do I need a permit?
Permit and inspection requirements depend on the property, jurisdiction and actual scope. Interior demolition or a remodel can require approvals even when the exterior is unchanged. Confirm the requirements with the local building department and project professionals before work begins.
07Where do you work?
Demolition Masters serves the Phoenix Valley, including the surrounding metro communities, plus Payson. Prescott projects are also considered. Share your city, site and project details so travel, availability and the scope can be confirmed.
08Can I get a price from photos or the calculator?
The calculator gives a rough planning range using published national benchmarks and stated component assumptions. These are illustrative allowances, not Demolition Masters prices or a binding quote. Kitchen and bathroom sets cover the listed cabinets, counters or fixtures; enter flooring and drywall separately so they are counted once. Photos and measurements help the team review the actual materials, access, concealed conditions, required coordination and haul-off before confirming a price.
09How do I start a project?
Call Demolition Masters at 602-334-6318 with your project city, property type and the materials you want removed. Approximate quantities, photos and access details help the team understand the scope. The project studio helps you prepare and download a brief to share with the team. Contact the team directly to request pricing or scheduling.
WHAT’S
YOUR NEXT?
Big plans or first questions.
Let’s start with a conversation.
